----Коммутатор HPE GbE2c Layer 2/3 Ethernet, 438030-B21

Коммутатор HPE GbE2c Layer 2/3 Ethernet, 438030-B21

Артикул:

438030-B21

43 632 ₽

550$

Курс ЦБ 79.33
на

Нашли дешевле?

Гарантия 12 месяцев

- +

В корзину

Купить в 1 клик

Пообщаться с менеджером

Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах

Сравнить

Избранное

Загрузить в pdf

Описание

Характеристика

Коммутатор BladeSystem cClass GbE2c Layer 2/3 Ethernet Blade Switch (5 ports 100/1000 + 4 SFP slots)

Forwarding Mode	Store and forward
MAC Addresses	Supports 8K MAC addresses per switch in a BladeSystem Enclosure
IGMP Groups	64
Memory	128 MB Main, 16MB flash and 1MB packet buffer per interconnect switch
Connector	5 RJ-45 4 SFP Modules 1 DB-9 Management
Network Transfer Rate	10 Base-T (half-duplex) 10 Mbps 10 Base-T (full-duplex) 20 Mbps 100 Base-TX (half-duplex) 100 Mbps 100 Base-TX (full-duplex) 200 Mbps 1000 Base-TX (half and full-duplex) 2000 Mbps
Security Features	SSHV2, TACACS and TACACS+ VLANs can be configured to provide segregation for data - improving bandwidth, performance and limiting traffic to its designated domains. GbE2c also provides secured access through SSH v2, protecting against IP spoofing as well as DNS spoofing. GbE2c enables users to meet their security requirements by providing support of HTTPS, RADIUS and TACACS.
Spanning Tree Features	802.1d, 802.1w, 802.1 s GbE2c's industry standard Spanning Tree provides redundancy and the loop avoidance capabilities to keep the network not only up, but operating at peak performance Based on the industry standard 802.1w, GbE2c Rapid Spanning Tree Protocol (RSTP) offers fast convergence - reducing packet loss and downtime in highavailability and high resilient networks. GbE2c's industry-standard based RSTP offers instant failover to secondary links in an unlikely event of primary link failure. GbE2c also offers Multiple Spanning Tree Protocol (MSTP; 802.1s) for seamless integration into networks running 802.1s. Multiple Spanning Tree enables networks to utilize individual uplinks for separate VLANs thus improving the overall performance of the network. Up to 32 Spanning Tree Groups (STGs) are supported.
Trunking Features	802.3 ad GbE2c reduces downtime in an unlikely event of link failure by supporting link aggregation protocol. GbE2c link aggregation is compatible with Cisco Etherchannel® thus providing seamless integration into Cisco® based networks.
VLAN Features	In GbE2c up to 256 VLANs (802.1Q) can be configured to provide segregation for data - improving bandwidth, performance and limiting traffic to its designated domains.
Management Features	GbE2c provides multiple easy-to-use configuration and management options. For compatibility, the GbE2c offers the same CLI as the GbE2. The GbE2c will also be software upgradeable to use an industry standard network administrator CLI (comparable to Cisco®) in a future release. GbE2c's Web-based management interface enables administrators to easily configure the most advanced features such as Rapid Spanning Tree, Uplink Failure Detection and SNMP management by pointing and clicking. GbE2c also enables sophisticated administrators to configure and manage the switch through SNMP. GbE2c provides full support for SNMP v1v2 and v3.
QoS Features	Data can be classified in different priority queues to ensure maximum bandwidth availability for time sensitive and mission critical traffic Data can be prioritized based on 802.1p CoS and DSCP
Layer 3 Features	IP Forwarding enables traffic to be forwarded between VLANs without the need of an external router or Layer 3 switch. This reduces traffic in the core network by making Layer 3 routing decisions within the BladeSystem enclosure 128 IP interfaces 4096 ARP entries Global default route Static routing support with 128 routing table entries Dynamic routing support with entries in routing table (4K entries) Routing protocol (OSPF, RIPv1/v2) RIP v1 RIP v2 OSPF VRRP(Virtual Router Redundancy Protocol) to maximize high availability in complex network environments
Standards Support	Compliance IEEE 802.3 802.3u 802.3ab 802.1d 802.1p 802.3ac 802.3ad (Static), and 802.1Q 802.3x 802.1x SNMP v1 (RFC 1157) RMON v1 (RFC 1757) groups 1, 2, 3, and 9 MIB-II (RFC 1213) Bridge MIB (RFC 1493) Interface Group MIB (RFC 2863) Ethernet MIB (RFC 1643) 802.1Q Extended Bridge MIB (RFC2674) Entity MIB (RFC 2037) SNMP Trap Convention (RFC 1215) Bridge Trap (RFC 1493) Remote Monitoring Traps (RFC 1757) and HP Enterprise Switch MIBs and Environmental Traps IGMP v1 (RFC 1112) IGMP v2 (RFC 2236) SNTP (RFC 1361) Telnet (RFC 854) TFTP client (RFC 783) BootP client, (RFC 2132), and XModem QoS (RFC 2474 and RFC 2475)
Safety and Compliance Safety Certifications	TUV to UL 60950-1, and CAN/CSA C22.2 No. 60950-1 and to EN 60950-1 CE Marking RoHS 5/6 compliant
Electromagnetic Emissions Certifications FCC Part 15 Class A	FCC Part 15 Class A EN 55022: 1998 (CISPR22) EN 55024: 1998 (CISPR24) VCCI Class A AS/NZS 3548 Class A CE CNS 13438 Class A MIC MIC